Analytical investigation of the exact groundwater divide between rivers beyond the Dupuit–Forchheimer approximation     

Ruoyi Li  Xu-Sheng Wang 《水文研究》2021,35(2):e14036

The groundwater divide is a key feature of river basins and significantly influenced by subsurface hydrological processes. For an unconfined aquifer between two parallel rivers or ditches, it has long been defined as the top of the water table based on the Dupuit–Forchheimer approximation. However, the exact groundwater divide is subject to the interface between two local flow systems transporting groundwater to rivers from the infiltration recharge. This study contributes a new analytical model for two-dimensional groundwater flow between rivers of different water levels. The flownet is delineated in the model to identify groundwater flow systems and the exact groundwater divide. Formulas with two dimensionless parameters are derived to determine the distributed hydraulic head, the top of the water table and the groundwater divide. The locations of the groundwater divide and the top of the water table are not the same. The distance between them in horizontal can reach up to 8.9% of the distance between rivers. Numerical verifications indicate that simplifications in the analytical model do not significantly cause misestimates in the location of the groundwater divide. In contrast, the Dupuit–Forchheimer approximation yields an incorrect water table shape. The new analytical model is applied to investigate groundwater divides in the Loess Plateau, China, with a Monte Carlo simulation process taking into account the uncertainties in the parameters.  相似文献   

2007-2017年中国沙尘气溶胶的三维分布特征及输送过程     

贾瑞  刘玉芝  吴楚樵  祝清哲  汪兵 《中国沙漠》2019,39(6):108-117

利用最新发布的CALIPSO产品，构建了2007-2017年中国沙尘气溶胶的三维分布，并结合HYSPLIT-4模式和再分析数据，探讨了沙尘的三维输送过程。结果表明：中国的沙尘排放源区主要是塔克拉玛干沙漠和巴丹吉林沙漠，沙尘气溶胶出现频率分别为60%和35%。塔克拉玛干沙漠排放的沙尘主要（50%~70%）停留在源地0~6 000 m高度，少部分向东输送至甘肃和内蒙古；巴丹吉林沙漠排放的沙尘则主要向东输送。中国沙尘排放量在春季最大，向东输送最强；夏季，东亚夏季风限制了沙尘向东输送；秋季，沙尘排放减弱，输送强度和夏季相当；沙尘排放量在冬季最小，输送最弱。夏季，沙尘在输送过程中可被抬升至高度5 000 m以上，春季次之，秋、冬季的沙尘主要在低层大气输送。沙尘在向东输送的过程中被抬升并和当地人为污染物混合变为污染性沙尘，华北地区污染性沙尘出现频率高达30%；输送到海洋的沙尘也会与洋面上（0~3 000 m高度）的海盐气溶胶混合，出现频率约为10%。  相似文献   

MicroRNAs identification and bioinformatics analysis in large yellow croaker Larimichthys crocea using an integrated comparative and ab initio approach     

房路京  肖世俊  韩兆方  王志勇 《中国海洋湖沼学报》2018,36(5):1707-1719

  相似文献   

An Early Cretaceous slab window beneath central Tibet,SW China: Evidence from OIB‐like alkaline gabbros in the Duolong area     

Hao Wu  Shulin Sun  Haiyong Liu  Hao Chu  Wei Ding 《地学学报》2019,31(1):67-75

The geodynamic mechanism of the late Early Cretaceous magmatic flare‐up in the collisional zone between the Lhasa and Qiangtang terranes in Tibet is controversial because of a scarcity of robust evidence. To address this problem, we report geochronological, geochemical and Hf isotopic data for the newly discovered Gufeng gabbros from the Duolong Cu–Au mineral district of the western Bangong–Nujiang Suture Zone (BNSZ). The gabbro samples, dated at 126.3 ± 1.8 Ma, show geochemical similarities to typical ocean island basalt (OIB) and have positive εHf(t) values of +3.3 to +6.9. The gabbros were generated by decompression melting of deep upwelling asthenosphere. This event is best explained by slab break‐off and the resultant development of a slab window beneath central Tibet.  相似文献   

Variations in glacier volume and snow cover and their impact on lake storage in the Paiku Co Basin,in the Central Himalayas     

Xingxing Zhang  Rui Wang  Zhijun Yao  Zhaofei Liu 《水文研究》2020,34(8):1920-1933

Glaciers and snow cover are important constituents of the surface of the Tibetan Plateau. The responses of these phenomena to global environmental changes are sensitive, rapid and intensive due to the high altitudes and arid cold climate of the Tibetan Plateau. Based on multisource remote sensing data, including Landsat images, MOD10A2 snow product, ICESat, Cryosat-2 altimetry data and long-term ground climate observations, we analysed the dynamic changes of glaciers, snow melting and lake in the Paiku Co basin using extraction methods for glaciers and lake, the degree-day model and the ice and lake volume method. The interaction among the climate, ice-snow and the hydrological elements in Paiku Co is revealed. From 2000 to 2018, the basin tended to be drier, and rainfall decreased at a rate of −3.07 mm/a. The seasonal temperature difference in the basin increased, the maximum temperature increased at a rate of 0.02°C/a and the minimum temperature decreased at a rate of −0.06°C/a, which accelerated the melting from glaciers and snow at rates of 0.55 × 10⁷ m³/a and 0.29 × 10⁷ m³/a, respectively. The rate of contribution to the lake from rainfall, snow and glacier melted water was 55.6, 27.7 and 16.7%, respectively. In the past 18 years, the warmer and drier climate has caused the lake to shrink. The water level of the lake continued to decline at a rate of −0.02 m/a, and the lake water volume decreased by 4.85 × 10⁸ m³ at a rate of −0.27 × 10⁸ m³/a from 2000 to 2018. This evaluation is important for understanding how the snow and ice melting in the central Himalayas affect the regional water cycle.  相似文献   

Benthic foraminiferal fauna and sediment provenance of Eocene syn-rift sequences in Taiwan: implication for onset of Asian epi-continental marginal seas off China coast     

Huang  Chi-Yue  Shao  Lei  Wang  Ming-Huei  Xue  Wei-Guang  Qiao  Pei-Jun  Cui  Yu-Chi  Hou  Yuan-Li 《Marine Geophysical Researches》2019,40(2):111-127

Marine Geophysical Research - Early Cenozoic rift basins developed commonly on the Mesozoic basement along the SE Asia Continent. However, Eocene–Oligocene sequences were only exposed widely...  相似文献   

Directional interpolation infinite element for dynamic problems in saturated porous media     

Xiong Hao  Chen Qingsheng  Zhu Bingjian 《地震工程与工程振动(英文版)》2020,19(3):625-635

In this study, a directional interpolation infinite element suited to a saturated porous medium is presented to account for dynamic problems with semi-infi  相似文献   

一种潜艇装备作战能力比较研究方法     

罗浩  宁云晖  陶伟  尤岳 《数字海洋与水下攻防》2020,3(6):494-498

对潜艇装备作战能力评估问题进行了研究，发现运用定量评估方法的过程中存在指标评价所需数据无法完全获取的问题。结合美弗吉尼亚潜艇改进情况，分析了影响潜艇作战能力的一些关键因素，重点基于潜艇武器装载能力，对国外典型潜艇进行了作战能力比较分析，最后对分析结果进行了评价，并讨论了未来潜艇作战能力评估方法的发展方向。  相似文献   

短脉冲激光在实验室天体物理方面的研究进展     

孙嘉宁  袁大伟  王菲鹿 《天文研究与技术》2021,(2):248-254

随着啁啾脉冲放大技术(Chirped Pulse Amplification,CPA)的飞速发展,激光功率密度实现了飞跃式的提升,利用短脉冲激光开展实验室天体物理研究的条件日趋成熟。短脉冲激光与靶相互作用可以产生相对论粒子(正负电子、质子、中子等)和高能电磁辐射(X射线、γ射线),这些粒子和辐射的产生过程与天体中的某些物理现象相对应。介绍了利用短脉冲激光开展实验室天体物理的研究进展,重点介绍了核天体物理、空心离子光谱学、相对论无碰撞冲击波以及等离子体状态诊断等。  相似文献   

Three-dimensional finite element simulation of fracture propagation in rock specimens with pre-existing fissure(s) under compression and their strength analysis     

Ramin Pakzad  Shanyong Wang  Scott W. Sloan 《国际地质力学数值与分析法杂志》2020,44(10):1472-1494

A FORTRAN program, consistent with the commercially available finite element (FE) code ABAQUS, is developed based on a three-dimensional (3D) linear elastic brittle damage constitutive model with two damage criteria. To consider the heterogeneity of rock, the developed FORTRAN program is used to set the stiffness and strength properties of each element of the FE model following a Weibull distribution function. The reliability of the program is assessed against available experimental results for granite cylindrical specimens with a throughgoing, flat and inclined fissure. The calibration procedure of the material parameters is explained in detail, and it is shown that the compressive to tensile strength ratio can have a substantial influence on the failure response of the specimens. Numerical simulations are conducted for models with different levels of heterogeneity. The results show a smaller load bearing capacity for models with less homogeneity, representing gradual coalescence of fully damaged elements forming throughout the models during loading. The maximum load bearing capacity is studied for various combinations of inclination angles of two centrally aligned, throughgoing and flat fissures of equal length embedded in cylindrical models under uniaxial and multiaxial loading conditions. The key role of the compressive to tensile strength ratio is highlighted by repeating certain simulations with a lower compressive to tensile strength ratio. It is proven that the peak loads of the rock models with sufficiently small compressive to tensile strength ratios containing two throughgoing fissures of equal length are similar, provided that the minimum inclination angles of the models are the same. The results are presented and discussed with respect to the existing experimental findings in the literature, suggesting that the numerical model applied in this study can provide useful insight into the failure behaviour of rock-like materials.  相似文献